Bristol Finish High Performance Wood Coatings

Bristol Finish high performance urethane coatings deliver where ordinary varnish products fail. They're fast and easy to use, incredibly durable, and produce a dazzling appearance that lasts for years, not months! Bristol Finish is one of the most highly rated exterior wood coatings on the market. This tough acrylic urethane provides more than 10 times the UV resistance and up to 100 times the abrasion resistance of conventional varnishes and other single part coatings. Sanding is not required between coats, and each coat may be applied at about one- hour intervals, allowing refinishing projects to be finished in a single day or weekend.

Product Features & Benefits

Over 20 years worth of field-testing and customer feedback have driven the development of Bristol Finish urethane coatings. These are the finest exterior and interior wood coatings that are available today. Bristol Finish urethanes are designed to be fast and easy to use. There's no sanding required between coats, and only an hour or so between coats is needed. Bristol Finish urethanes are designed with high performance in mind. Our exterior products have the highest level of UV resistance that is possible to achieve in a transparent coating.

Our interior products deliver a finish suitable for fine furniture, yet are tough enough for gymnasium floors. Bristol Finish urethanes will save you time and money compared to other coatings. The fast and easy application is only the first savings. With very low maintenance needed, our products pay for themselves year after year.

Traditional Amber Urethane
for high performance exterior and interior use on Bars and Table Tops

Quart Kit (1.06 liters)
Contains 32 oz (946 mL) Urethane Resin and 4 oz (118 mL) Catalyst
Approximate coverage :

1 coat - 200 sq ft (18,6 sq M)
4 coats (minimum) - 50 sq ft (4,65 sq M)
6 coats (optimal) - 33 sq ft (3,07 sq M)

Gallon Kit (4.26 liters)
Contains 1 gal (3,78 L) Urethane Resin and 16 oz (472 mL) Catalyst
Approximate coverage:

1 coat - 800 sq ft (74,4 sq M)
4 coats (minimum) - 200 sq ft (18,6 sq. M)
6 coats (optimal) - 133 sq ft (12,4 sq M)

Satin Additive - 8 oz. (236mL)
Use to impart a satin or matte effect. Satin Additive is used in the final coat. Contains enough to achieve a light satin effect with two Quart Kits, or a total flat effect with one Quart Kit.

Accelerator - 2 oz. (59mL)
Use to speed the dry and cure time. For spray application where faster dry and recoat time is desired, or for any application performed in cold weather.

Tropical Reducer -32 oz. (946 mL)
Use to slow the dry and cure time. For use in very hot weather to promote flow and leveling for brush or roller application. Use 10% by volume or less.